The highly automated high-speed forging presses form the heart of our forging operations. In a precisely controlled temperature range of 1100 °C to 1250 °C, we produce steel parts that can withstand the highest mechanical stresses.
By heating the primary material inductively, we guarantee precise temperature control and therefore a homogeneous microstructure quality throughout the entire series.
We rely on the globally recognized Hatebur technology to press components highly efficiently in four forming stages. Our expertise in impact extrusion parts, which we realize with a special ejector stroke (up to 180 mm on the AMP 70), is particularly noteworthy.
| System type | Number | Max. Part weight | Max. Diameter | Pressing force |
| Hatebur AMP 50 (XL) | 1 | up to 2.0 kg | approx. 104 mm | 8,000 kN |
| Hatebur AMP 70 (L) | 3 | up to 5.0 kg | approx. 150 mm | 12,000 – 15,000 kN |
| Feature | Hatebur AMP 50 (XL) | Hatebur AMP 70 (L) |
| Number of machines | 1 machine | 3 machines |
| Forming stages | 4 steps | 4 stages |
| Operating weight | up to 2.0 kg | up to 5.0 kg |
| Max. Ø forged part | approx. 104 mm | approx. 150 mm |
| Stroke rate | 60 – 100 / min | 50 – 80 / min |
| Total pressing force | 8,000 kN | 12,000 – 15,000 kN |
| Special feature | Impact extrusion parts possible | 180 mm ejector stroke for impact extrusion parts |
A decisive advantage of our continuous process is the possibility of controlled cooling directly from the forging heat. This enables us to set specific strength values during the process and make subsequent heat treatment steps more efficient.
